Anatase Sol Prepared from Peroxotitanium Complex Aqueous Solution Containing Niobium or Vanadium

Niobium- or vanadium-doped anatase sols were prepared by hydrothermal treatment of 0.1 mol/dm³ peroxotitanium complex aqueous solutions dissolving 0–10 mol% niobium or vanadium at 100°C for 8 h. Niobium-doping caused the increase of lattice constants of anatase and the shape change of anatase crystal from spindle-like to cubic-like structure, but no change of the optical absorbance. Vanadium-doping caused the decrease of lattice constant of c -axis, the miniaturization of anatase crystal and the increase of optical absorbance at the wavelength from 350–700 nm.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly（ ethylene terephthalate ） （PET） and polyethylene （PE） as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with laminin （ LCP solution ）. The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin-apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite coruposite coating.     

Pulmonary complications in hematological diseases

A clinical study was conducted to compare the analgesic effect of clonidine with those of sumatriptan and their mixture and their effects on hemodynamics. 40 patients undergoing elective total hysterectomy were randomly divided into 4 groups in terms of the epidurally administered drugs with 10 patients in each group (group C1: clonidine 150 micrograms, group C2: clonidine 75 micrograms, group S: sumatriptan 6 mg and group S + C: clonidine 75 micrograms + sumatriptan 3 mg). MAP, HR, SpO2, VT VAS, VRS and ePDT were measured in the initial 4 h. The demographic data and the doses of intraoperative local anesthetics among the 4 groups were not statistically different. It was found that no significant difference in the pre- and postadministration values of HR, SpO2 and VT. A obvious reduction of MAP appeared in the groups of C1 and C2, but in the other groups the hemodynamical parameters were stable. The groups of C1, C2 and S + C showed significant increase in VAS and VRS, along with increase of ePDT when compared with the pre-drug level. There was no obvious alteration in group S after the drug administration. It was concluded that (1) single use of sumatriptan is ineffective in the dose given in this study; (2) small dose (150 micrograms and 75 micrograms) of clonidine has epidurally analgesic effects; (3) combined use of sumatriptan and clonidine is an acceptable way in epidural analgesia, in terms of its analgesic effect and hemodynamic changes.     

Electrophysiological elucidation of pathways of intrinsic horizontal connections in rat visual cortex

In single pass perfused rat liver, rapid osmotic water shifts across the plasma membrane in response to hyperosmolar urea were followed by monitoring liver mass and transient concentrating or diluting effects on Na+ concentration in effluent perfusate. Sudden addition or removal of hyperosmolar urea (200mM, resulting in a step change of the perfusate osmolarity from 305 to 505 mosmol/l) had little effect on liver mass or Na+ activity in the effluent perfusate, suggesting that urea equilibrated at a rate similar to that of water across the liver plasma membrane. When, however, phloretin (0.2mM) was present, sudden addition (removal) of urea (200mM) induced within seconds a marked and transient decrease (increase) of both liver mass and effluent Na+ concentration, suggestive of transient osmotic water shifts out of/into the cells. Although to a lesser extent, comparable effects were induced when urea was added/removed in the presence of the phloretin-related phenol compounds 2,4,6-trihydroxyacetophenone (5mM) and 2,4,5-trihydroxybutyrophenone (5mM). Phloretin-induced inhibition of urea export from livers preloaded with [14C]urea was reversible, and no saturation of urea transport was found at concentrations up to 200mM. In contrast to [14C]urea transport, [3H]water transport across the plasma membrane was not affected by phloretin. The data indicate that urea export across the hepatocyte plasma membrane is almost as fast as water export. The urea transport mechanism is sensitive to phloretin and other phenol compounds, works with high capacity and is distinct from the water-transporting system. The regulation of this putative transport mechanism and its relevance for hepatic nitrogen metabolism remain to be established.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

1Introduction Themostimportantrequirementofapercutaneous deviceisthepreventionofbacterialinfectionthroughtheinterfacebetweenthematerialandtheskin.Therefore,a percutaneousdevicehastoadherefirmlytoskintissueandpreventepidermaldowngrowth.Previously,Aokietalp…     

Imaging of a single atomic column in silicon grain boundary

Atomic resolution high voltage electron microscopy was applied in investigations of the atomic structure of [112] sigma3 CSL grain boundary of silicon. Images of the grain boundary, viewed in the < 110 > direction, showed two types of dark spots. One type was rod shaped, which represented an atomic pair aligned in the < 111 > direction. The other was a small round spot, which represented a single atomic column in the grain boundary. The atomic structure of [112] sigma3 CSL grain boundary was directly shown from the atomic-structure image.     

Isotope dilution analysis of Se in human blood serum by using high-power nitrogen microwave-induced plasma mass spectrometry coupled with a hydride generation technique

To establish a method for sensitive, accurate, and precise determination of Se in real samples, isotope dilution analysis using high-power nitrogen microwave-induced plasma mass spectrometry (N2 MIP-IDMS) was conducted. In this study, freeze-dried human blood serum (Standard Reference Material, NIES No. 4) provided by NIES (National Institute for Environmental Studies) was used as a real sample. The measured isotopes of Se were 78Se and 80Se which are the major isotopes of Se. The appropriate amount of a Se spike solution was theoretically calculated by using an error multiplication factor (F) and was confirmed experimentally for the isotope dilution analysis. The mass discrimination effect was corrected for by using a standard Se solution for the measurement of Se isotope ratios in the spiked sample. However, the sensitivity for the detection of Se was not so good and the precision of the determination was not improved (2-3%) by N2 MIP-IDMS with use of the conventional nebulizer. Therefore, a hydride generation system was connected to N2 MIP-IDMS as a sample introduction system (HG-N2 MIP-IDMS) in order to establish a more sensitive detection and a more precise determination of Se. A detection limit (3 sigma) of 10 pg mL-1 could be achieved, and the RSD was less than 1% at the concentration level of 5.0-10.0 ng mL-1 by HG-N2 MIP-IDMS. The analytical results were found to be in a good agreement with those obtained by the standard addition method using conventional Ar ICPMS.     

Managing what you measure: creating outcome-driven systems of care for youth with serious emotional disturbances

This article presents the California System of Care Model for youth with severe emotional disturbances as an illustration of how ongoing assessment of the costs and outcomes of service delivery can be an integral part of a service delivery model. The core of this model, developed initially in Ventura County, California, is a five-step planning process that guides care system development and implementation. The implications of each stage of the planning process for evaluation and feedback at the child, family, and system levels are highlighted. A set of principles for selecting outcome measures deriving from the planning process are also presented that, in conjunction with the planning model, serve as guidelines for establishing outcome measures within care systems. The resulting specific plan for measuring system- and client-level outcomes deriving from this process, along with challenges to the implementation of the outcome management plan, is described.     

Factors affecting the oxidative activity of laccase towards biphenyl derivatives in homogeneous aqueous-organic systems

Catalytic oxidation of biphenyl derivatives was investigated using laccase in a homogeneous aqueous-organic system. A thermostable laccase from Trametes sp. showed the highest catalytic activity for the oxidation of 4-hydroxybiphenyl (4-HB) at a reaction temperature of 60 degrees C when dimethylsulfoxide (DMSO) was employed as a co-solvent. Furthermore, the catalytic performance was successfully enhanced by the incorporation of a laccase mediator system (LMS) into the aqueous-DMSO media. The catalytic performance strongly depended on the type of mediator, and the highest activity was observed with 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as mediator, suggesting the importance of the selection of a suitable mediator. It was verified that this mediator system is applicable to the oxidation of several biphenyl derivatives with hydroxyl groups.